Cat 6A Ethernet High Flex Cable
- Flex Life: 10,000,000 Cycles Nominal
- 500 MHz Performance Speeds
- Ideal for 100BASE-TX and 10GBASE-T (10-Gigabit Ethernet)
- Exceptional EMI/RFI Suppression
Cicoil High Flex Cat 6A Ethernet Cables are designed for both flexible and hi-flex application. Their superior flexibility is beneficial to repeated motion applications, and with tight routing and installation requirements. A flat profile, ultra-flex wire strands, and extremely bendable Flexx-Sil™ jacketing enable very small bend radii (flexible = 0.9"; flex for continuous motion = 1.5"), and deliver a 10 Million flex cycle life, with no wire compression, corkscrewing, or distortion.
Applications PLC and DCS Automation Networks, Field Level Networking and Ethernet Networks
Flex Cable vs Flexible Cable?
Ultra-Flex Wire is at the Core
Inherently Small Bend Radius
-
Bulk Cable
- Amp Rating: 1.4
- Conductor Gauge: 28 AWG
- No. of Paired Conductors: 4
- A - Width (inches): 0.52
- B - Height (inches): 0.15
Part Numbers Order Through DC-601 Cicoil
Complete Assemblies
Signal (J1): RJ45Other connector types available. Please contact Cicoil.
E-mail or Speak to an Engineer: 661-295-1295 Option 4
Click the DIGI-KEY order button where available to purchase from Digi-Key Prices shown are Cicoil list prices. DigiKey prices may vary.
-
Mechanical
- Conductors: Ultra flexible, finely stranded, tinned copper
- Shielding: Ultra flexible, braided shields, with 90% nominal coverage
- Minimum Bend Radius:
- - 6x cable height for intermediate flex
- - 10x cable height for continuous flex
- Flex Life: 10,000,000 cycles nominal
- Outer Jacket Durometer Rating: 65 (Shore A)
Environmental
- Temperature Rating: -104°C to +165°C
- Moisture Rating: Submersible, Salt Water Resistant
- Clean Room Rating: Class 1, Zero Particulates
- Extreme Environments: Sunlight, UV Light, Alcohol, Chemical and Oil Resistant
- Outer Jacket Dielectric Strength: 450 volts/mil (17.7 kv/mm)